AiM Hondata K-Pro Ecu Cable
Hondata “K-Pro” ECU is equipped with a serial communication setup used to export data
to an external logger. Communication between the ECU and AIM loggers needs a
previous software setup to be made using “KManager”, Hondata software.
Technical notes:
Hondata KPro protocol works with PRB ECU and - if PRB calibration is loaded- also
with PNF, PND, PRC and PRD ECUs.
Moreover, to work properly, KPro ECU needs AIM “Hondata board” (Part number
X05EFIHKPRO).
Once the ECU is connected to the logger, it is necessary to set it in the logger
configuration in Race Studio 2 software.
Select Manufacturer “Hondata” Model “KPro”.
Refer to Race Studio Configuration user manual for further information concerning
the loggers configuration.
For any further information concerning ECU firmware/software settings and/or
upgrading it is always recommended to address to the ECU dealer.
